Technical data

4
Close the locking slide and fill the hopper with coffee beans. Open the locking slide so
that the beans are allowed to drop into the grinding system.
SWITCHING THE APPLIANCE ON AND OFF
MODEL A
In order to power up the appliance, set the on-off knob to I.
After having placed the filterholder on the filterholder-
fork, push the switch indicating the required dose.
- In order to dose a single dose, push the switch on the
left (indicating one cup)
- In order to dose a double dose, push the switch on the
right (indicating two cups)
One can manually activate the appliance keeping pushed
in the switch (indicating ) in the center of the con-
trol panel, letting go the central switch will stop the grinding.
This central switch is meant to facilitate the adjustment of the coarseness of the grind
of the appliance.
In order to switch off the appliance manually, set the on-off switch knob to O.
MODEL B
In order to power up the appliance, set the on-off knob to I.
After having placed the filterholder on the filterholder-fork, push the central button
as follow:
- push one time to dose a single dose (the light indicating one cup turns on)
- push two time (with a waitng range of 1 sec between two pushing) to dose a double
dose (the light indicating two cups turns on)
One can manually activate the appliance keeping pushed in the central button (both the
lights are winking simultaneously), letting go the central switch will stop the grinding.
This central switch is meant to facilitate the adjustment of the coarseness of the grind
of the appliance.
In order to switch off the appliance manually, set the on-off switch knob to O.
ADJUSTING GRINDING
In order to achieve finer or coarser grinding, the adjustment disk located under the hop-
per must be adjusted using the relevant handle.
In order to increase the coarseness of the ground coffee, the disk must be rotated
clockwise; to decrease, turn the disk anticlockwise.
The disk remains in the chosen position without having to be locked in place.
The adjustment must be performed with the motor on, and preferably without any cof-
fee between the grinding blades.
Grind small amounts of coffee in order to determine the optimal degree of fineness.
HOPPER
SAFETY SCREW
HOPPER
OPEN
SINGLE DOSE
SWITCH (mod. A)
DOUBLE DOSE
SWITCH (mod. A)
MANUAL GRIN-
GING PUSH-
BUTTON (mod. A)
CENTRAL
COSING BUTTON
(mod. B)