Instruction Manual

Page 10 of 19
Subwoofer Enclosure Install
● Install amplier plate using two
T40 self cutting screws into the
two existing holes circled and you
may have to remove a wire clip if
present and leave screws loose
till another step
● Rotate enclosure toward bracket
lifting upward and using a 4mm
allen wrench loosely install the
three M5 button head bolts with
thread patch to the top of the
enclosure
● Rotate enclosure toward bracket
lifting upward and using a 4mm
allen wrench, loosely install the
three M5 button head bolts with
thread patch to the top of the
enclosure