Installation Guide

14
©2020 Maxxsonics USA, Inc.
REASSEMBLY
VEHICLE REASSEMBLY
Follow along any wiring you’ve routed and zip-tie to the vehicle to assure it doesn’t come loose during
rides. Do not zip-tie your wiring to any heat or moisture sources. Once your wiring is secure, you can begin
reassembling all the panels.
Here is an important checklist so you do not forget anything:
2013-2018 RZR Models
● TIGHTEN NEGATIVE BATTERY TERMINAL FULLY
● REINSTALL SEATS
● FRONT OF DASH - CHECK ALIGNMENT WHERE THE DASH MEETS THE SUBWOOFER
● ZIP-TIE WIRING WHILE AVOIDING HEAT SOURCES OR MOVING PARTS
● REASSEMBLE TOP OF DASH
● REPLACE HOOD
2018.5 Turbo S and 2019+ RZR Models
● TIGHTEN NEGATIVE BATTERY TERMINAL FULLY
● REINSTALL DYNAMIX
®
ECU BRACKET (IF PRESENT) - TIGHTEN TWO 10MM BOLTS
● FINAL FIT OF AMPLIFIER BRACKET (OR YOUR CHOSEN MOUNTING METHOD) - TIGHTEN
REMAINING TWO 10MM BOLTS FOR ECU BRACKET
● REINSTALL SEATS
● FRONT OF DASH - CHECK ALIGNMENT WHERE THE DASH MEETS THE SUBWOOFER
● ZIP-TIE WIRING WHILE AVOIDING HEAT SOURCES OR MOVING PARTS
● REASSEMBLE TOP OF DASH
● REPLACE HOOD