Owner's Manual
Table Of Contents
- Operator’s Guide and Installation Instructions
- General Information
- Wiring and Connections
- Can-Am X3 Source Unit Mounting Instructions
- Front Panel Controls
- Source Selection
- AM/FM Configuration
- AM/FM and Weather Band Operation
- Bluetooth Pairing
- Bluetooth Pairing & Operation
- USB Input
- USB RPT and RDM Functionality
- Auxiliary (AUX) Input and Camera
- SETTINGS Menu
- Audio System Design Ideas
- Diagnostics & Troubleshooting
3
Wiring and Connections
(M) Yellow
(L) White/Black
Water Tight Plug Face Shown (Wires to Connect Exit Rear)
(K) White
(J) Red
(H) Purple/Black
(G) Purple
(F) Gray
(E) Gray/Black
(D) Green/Black
(C) Green
(B) Blue
(A) Black
Yellow (+12v Constant)
Red (+12v Accessory)
Water
Tight Plug
USB Connector
Orange (Illumination)
Purple/White (Reverse)
AM/FM Antenna
AUX Input
SUB Outputs
FRONT Preamp
Outputs*
REAR
Preamp Outputs*
Camera Input
CVBS Video Output
(Mirrors Unit’s Screen)
Black (Chassis Ground)
Blue(Amp Turn-On)
*Works with
ZONE Control
Note: See wiring chart on next page for connection tips, wire
colors and functions. Also note preamp level output connections
if using external ampliers and ZONE control capability.
See page 19 for Video Output details