Owner's Manual
WIRING
&
INSTALLATION
INSTALL
THE
UNIT
• Please note: This unit requires a minimum 3-3/4" mounting depth which
includes space for the electrical/speaker plugs
and
any
AN
input
and
output
connections.
1. Cut
or
utilize a mounting opening 7"(H) x 2" W).
2. Remove the left and right decorative covers as shown
in
the diagram.
3. Insert the unit into the mounting opening.
4. Attach the unit using the four (4) supplied mounting screws.
5. Replace decorative side covers over mounting screws.
4
Dashboard
or
*Minimum 3-3/4"
Installation Depth
Required