Owner's Manual
OPERATION
POWER AND BASIC ADJUSTMENTS
Turn the Unit ON
or
OFF
Press POWER
(!)
button to turn the unit ON. When the unit is switched on, press and hold
POWER
(!)
button for 2 seconds to switch the unit OFF. A "GOOD BYE" message is displayed to
confirm power down.
Sound Adjustments
Press and release POWER
(!)
button, then repeat
to
choose sound settings in the following
order: BASS-TRE-BAL-FADER-EQ-LOUD
• Bass - Choose from -7 to + 7
• Treble - Choose from -7 to +7
• Balance - Choos~ Left
or
Right (up to 7 steps
in
either direction)
• Fader - Choose Front
or
Rear (up
to
7 steps
in
either direction)
• EQ -
If
"OFF", pressing the
VOL+
or
VOL
- buttons allow you to choose from pre-
programmed tone settings* :
o Classical
o Rock
o Pop
o Flat
o Jazz
o EQ OFF
o *Note:
If
one
of
the EQ sound settings is chosen, manual Bass
and
Treble adjustments are
disabled. Only "BAL"
and
the name
of
the
EQ
setting will show in the Sound Adjustment
menu.
To
disable the EQ
and
allow manual Bass/Treble setting, simply scroll through the
settings until "EQ
OFF
" is displayed.
• LOUD - Press the
VOL+
or
VOL
- buttons cycle between ON
or
OFF**.
o **Note: Loudness gives a boost
of
low
and
high frequencies
at
low
volumes,
but
can
add
more distortion
at
high volumes.
We
recommend leaving in the
OFF
position
and
using an
EQ setting
to
achieve the sound profile that achieves the
best
low
and
high volume
performance
for
your
system.
• Once the sound settings are chosen, the menu will automatically cancel after 5 seconds
of
inactivity.
Setting Adjustments (USB, iPhone/iPod, Bluetooth
or
AUX
Sources)
Press and release POWER
(!)
button, then repeat after cycling the sound adjustments for the
setting menus: BEEP ON/OFF-CLOCK 12/24 - P _
VOL
• In each menu item, pressing the
VOL+
or
VOL - buttons allow you to select the sub-
settings.
• Once the settings are chosen, the menu will automatically cancel after 5 seconds of
inactivity.
7