Technical data

Brocade MLX Series and NetIron Family Documentation Updates 17
53-1002805-03
Hybrid port mode OpenFlow
1
Setting the system maximum
The system-max openflow-pvlan-entries command sets the CAM size of OpenFlow protected VLAN
entries for the device. By default, this value is set to 0.
Brocade(config)# system-max openflow-pvlan-entries 2000
Syntax: system-max openflow-pvlan-entries value
The value variable represents the number of port and protected VLAN combination entries that can
be configured in the system. The range is from 0 to 2048. Once this command is used, you must
reload the system.
Displaying OpenFlow configuration information
The show OpenFlow command displays the configuration for OpenFlow.
Brocade(config)# show openflow
Number of Controllers: 2
Controller 1:
Connection Mode: passive, TCP,
Listening Address: 0.0.0.0
Connection Port: 6633
Connection Status:
SSL Connection :False
No TCP connection found.
Controller 2:
Connection Mode: active, TCP,
Controller Address: 10.20.101.199
Connection Port: 23
Connection Status:
Local IP address:port <-> Remote IP address:port TCP state RcvQue RxBuffe
SendQue TxBuffe
10.20.178.73 8807 10.20.101.199 23 ESTABLISHED 0 0 0
0
SSL Connection :False
Match Capabilty:
L2: Port, Source MAC, Destination MAC, Ether type, Vlan, Vlan PCP
L3: Port, Vlan, Vlan PCP, Source IP, Destination IP, IP Protocol, IP TOS, IP Src
Port, IP Dst Port
Normal Openflow Enabled Ports: e2/1
Hybrid Mode ports Protected Vlan-IDs
e4/1 (100,101,102,103)
e7/2 (200)
Default action: drop
Maximum number of flows allowed: 4096
Maximum number of Protected Vlans allowed: 2048