Technical data

26 Brocade MLX Series and NetIron Family Documentation Updates

53-1002805-03

Multi-Chassis Trunk (MCT) client-interfaces delay

Use the client-interfaces delay command to set the delay before brining up the CCEP port. This

command is used to set the delay, so that after a node is reloaded, with just L2vpn peer alone, the

delay to bring up the CCEP port will be the designated value.

Brocade(config-cluster-TOR)#client-interfaces delay 60

Syntax: [no] client-interfaces delay time in sec

The default value for delay is 30 seconds. The acceptable values range between 20 to 600

seconds.

NOTE

Client-interface delay is only applied with just L2 VPN. It does not support L2+L2VPN.