Manualshelf

Technical data

ManualsBrandsMB QUART ManualsAmplifierMLX-100
51525354555657585960
Brocade MLX Series and NetIron Family Documentation Updates 47
53-1002805-03
Discontinuing FID updates
1
• Reconfiguring the timeout period
• Checking for Syslog messages
Discontinuing FID updates
When the following command is enabled, FID updates will not be sent to the line card. A new FID
will be created on the management card and sent to the line card. This command will create a new
FID before breaking the old FID, thereby avoiding traffic loss.
Brocade# ip multicast no-fid-update
Syntax: ip-multicast no-fid-update
Change the max-response-time value
Use the following command to change the maximum response time value set in the IGMP Group
Specific Query and IGMP Group Source Specific message.
NOTE
This command will not change the max-response-time value set in the General Query message.
Brocade# ip multicast max-response-time
Syntax: ip-multicast max-response-time
Clearing the QoS packet and byte counters
You can clear the QoS counters whose display is generated using the show np statistics command
as shown in the following.
Syntax: clear np statistics
Brocade# clear np statistics