Technical data

56 Brocade MLX Series and NetIron Family Documentation Updates

53-1002805-03

Displaying VLAN information

The following change is an update to Chapter 10 VLANs. The output is displayed as shown in the

example below.

Displaying VLAN information for specific ports

To determine which VLANs a port is a member of, enter the following command.

Brocade# show vlan e 4/1

VLANS 1

VLANs 100

show vlan ethernet slot-number/port-number [ | [ begin expression | exclude expression |

include e

xpression]

The ethernet slot-number/port-number parameter specifies a port. The command lists all the VLAN

memberships for the port.

The output shows the following information.

Sflow sampling on Brocade NetIron CES and

Brocade NetIron CER devices

This is an update to the section titled Configuring and enabling sFlow in the sFlow chapter.

NOTE

Sflow samples outbound traffic if the sflow enabled port is monitored by a mirror port.

On Brocade NetIron CES and Brocade NetIron CER devices, if mirrored Sflow packets are received

in the LP CPU there is no option to distinguish them from regular Sflow packets.

Output of show vlan EthernetConfiguration Guide.fm

This field... Displays...

VLANs The IDs of the VLANs that the port is a member of.