Technical data

Unified IP MIB Reference 71
53-1002805-03
Management module diagnostics
After the system reboots, you can display the status of the module using the show module
command, as shown in the following example.
BigIron# show module
Module Status Ports Starting MAC
M1 (upper): NI-XMR-MR Management Module Active
M2 (lower):
F1: NI-X-SF Switch Fabric Module Active
F2: NI-X-SF Switch Fabric Module Active
F3: NI-X-SF Switch Fabric Module Active
F4: NI-X-SF Switch Fabric Module Active
S1: NI-XMR-1Gx20-SFP 20-port 1GbE/100FX Module CARD_STATE_SW_LOADED 20 0000.003d.8500
S2:
S3: NI-XMR-1Gx20-SFP 20-port 1GbE/100FX Module CARD_STATE_UP 20 0000.003d.8550