Installation manual

26
Sound Controls
Bass:
1. Select the Bass mode (BAS) by pressing the
SETUP button.
2. Increase the Bass by pressing the button.
Decrease the Bass by pressing the button.
3. Control reverts back to volume control after 5
seconds.
Volume:
Increase the volume by pressing the button.
Decrease the volume by pressing the button.
Bass, Treble, Balance, Fader and
Subwoofer Controls
Select the desired sound mode by pressing the
SETUP button. The modes will be displayed in
the following order: Bass, Treble, Balance, Fader,
Subwoofer Line Level Output and Subwoofer
Cutoff Frequency.
AM/FM Radio Operation
(Continued)
Automatically Store Radio Stations:
1. Press the ENT BND button to select either the
FM1, FM2, FM3, AM1 or AM2 radio band.
2. Press and hold the ASM button until “AST”
appears in the display. The tuner will search
for the strongest stations and store them into
memory. The new stations will replace sta-
tions that were previously stored in the cur-
rent band.
Note: After the new stations are stored into
memory the tuner will start scanning the
newly memorized stations.
3. Press the ASM button to stop scanning when
a desired station is reached.
Scanning Stored Radio Stations:
1. Press the ENT BND button to select either the
FM1, FM2, FM3, AM1 or AM2 radio band.
2. Press the ASM button and the tuner scans for
preset stations stored in the current band and
pauses for 5 seconds at each station. When a
desired station is reached, press the ASM but-
ton again to stop scanning.
Hold
CD
CD