Installation manual

34
Sirius Satellite Radio Operation (Option) (Continued)
Recalling Memorizing Sirius Channel:
1. Press the ENT BND button to select either the
SIR1, SIR2 or SIR3 band.
2. Press and release the Sirius channel recall
button 1, 2, 3, 4, 5, or 6 to select the memo-
rized channel.
Scanning Stored Sirius Channels:
1. Press the ENT BND button to select either the
SIR1, SIR2 or SIR3 band.
2. Press the ASM button and the tuner scans for
preset channels stored in the current band
then pauses for 5 seconds at each channel.
When a desired channel is reached, press the
ASM button again to stop scanning.
Skipping Sirius Channel:
You can program the
radio to skip a Sirius channel you do not want.
1. Tune to the channel to be skipped (see Sirius
Satellite Radio Operation for more details).
2. Press the MENU button until “SKIP” appears
in the display.
3. Press the ENT BND button until “SKIP” flashes
in the display.
4. Press the MENU button and “SKIP” disap-
pears from the display. The channel will now
be skipped.
Reinstating a Skipping Sirius Channel:
1. Tune to a channel next to a skipped channel.
(Example: If channel 2 is skipped tune to
channel 1.)
2. Press the MENU button until “SKIP” appears
in the display.
3. Tune in the skipped channel. (Example: Press
the button and “003” appears in the
display).
Note: “SKIP” will be flashing in the display on
all skipped channels.
4. Press the ENT BND button until “SKIP” stops
flashing.
5. Press the MENU button and “SKIP” disap-
pears from the display. The channel is now
reinstated.
CD