Installation manual

6
AM/FM Radio Operation (Continued)
Manually Tuning in a Radio Station:
Press and hold either the or button until
“MANUAL” appears in the display then release.
Then press the or until the desired radio
station appears in the display.
Tuning in a Radio Station Using Seek:
Press and release either the or button
and the tuner will scan to the next strong station,
stop seeking and start playing.
Memorizing Radio Stations:
1. Press the ENT BND button to select either the
FM1, FM2, FM3, AM1 or AM2 radio band.
2. Tune-in the desired radio station.
3. To memorize the station press and hold any-
one of the six radio station recall buttons until
you hear a beep.
Recalling Memorizing Radio Stations:
1. Press the ENT BND button to select either the
FM1, FM2, FM3, AM1 or AM2 radio band.
2. Press and release one of the six radio station
recall buttons to select the memorized radio
station.
Automatically Store Radio Stations:
1. Press the ENT BND button to select either the
FM1, FM2, FM3, AM1 or AM2 radio band.
2. Press and hold the ASM button and
“SEARCH” will appear in the display. The
tuner will search for the strongest stations
and store them into memory. The new sta-
tions will replace stations that were previously
stored in the current band.
Note: After the new stations are stored into
memory the tuner will start scanning the
newly memorized stations.
3. Press the ASM button to stop scanning when
a desired station is reached.
Hold
DVD