009-2010 DODGE CHALLENGER 3.5L V6 Removal of stock system: Figure 1 1. Apply a penetrating lubricant liberally to all exhaust fasteners, hangers and rubber insulators. 2 Remove the rubber exhaust from the rubber insulators. Refer to Figure 1. Figure 2 3. Loosen the band clamps on the factory exhaust located in front of the Y-pipe. Refer to Figure 2. 4. Remove the exhaust from the remaining rubber insulators. Refer to Figure 3. Figure 3 5. Remove the exhaust from the vehicle. Refer to Figure 4.