ISO 9001 CERTIFIED CX-403 4 Channel DMX Console 【User manual】 Lite-Puter Enterprise Co., Ltd. website：www.liteputer.com.tw E-mail: sales@liteputer.com.
ISO 9001 CERTIFIED Chapter 1. 1-1 CX-403 Instruction Feature Standard DMX 512 signal control 4 dimming control channel 4 control scene setting Chaser function: 1.Channel chase 2.Scene chase 3.Speeding control 4.Chase Function Flash Audio input Specification Power supply Control signal Control channel Connector Audio input DC 12V/ 1A DMX512 / 1990 4 channel XLR 3-pin(x1), XLR 5-pin(x1),phone jack RJ11(x2) Max. input：-10 db 100mV Weight Dimension 1.1 Kg unit：mm 200 CX-403 4CH.
ISO 9001 CERTIFIED 1-3 CX-403 Function 1 CX-403 4CH.
ISO 9001 CERTIFIED 1-4 CX-403 Rear panel PUSH ON CONTROL PUSH 5 DC 12V IN 12 1-5 4 OFF AUDIO IN DMX OUT DMX OUT 13 14 15 16 1 3 2 1:GND 2:Data3:Data+ 4:NC 5:NC 1 2 3 1:GND 2:Data3:Data+ 4 3 21 4 3 21 1:V+12V 2:Data+ 3:Data4:GND 17 12 Power supply: DC 12V / 1A 13 Power switch 14 Audio input: 100mV 15 DMX connector: XLR 5-PIN 16 DMX connector: XLR 3-PIN 17 DMX connector: PHONE JACK (RJ11) CX-403 audio sensitivity control 18 Audio sensitivity control 18 3 Lite-Puter
ISO 9001 CERTIFIED Chapter 2. CX-403 operation 2-1 SCENE setting Select【CH】mode, and move the fader to set the dimming value press【PROG】+【1~4】 to save control scene. STEP-1 press【SC / CH】to select the control channel LED : off in CH mode LED : on in SC mode STEP-2 move【MASTER-VR】to the top STEP-3 move【VR-1 … VR-4】to dimming STEP-4 press【PROG】+【1…4】to confirm and save the selection 1.) When MASTER-VR in 100%, and the VR-1…VR-4 in 50% of dimming value, the SCENE total output dimming value will be 50%. 2.
ISO 9001 CERTIFIED 2-3 CHASE (1) Internal chase setting (SPEED CHASE) (2) Audio input control (AUDIO) 2-3-1 Internal chase setting ( SPEED CHASE ) 2 mode of chase setting: (1) in【CH】mode : Chase by CH mode (2) in【SC】mode : Chase by SC mode 【CH】mode STEP-1 press【SC/CH】, to select the channel. (LED ”off”) STEP-2 to select the chase. 1. Led : ● on ○ off press【CHASE 1】: CH.
ISO 9001 CERTIFIED 【SC】mode STEP-1 press【SC/CH】, to select the SC mode STEP-2 to select press【CHASE 1】：to execute the SC-1…SC-2 chase. press【CHASE 2】：to execute the SC-3…SC-4 chase. press【CHASE 1】+【CHASE 2】：to execute the SC-1…SC-4 chase.
