Owner's manual

DMX-32 User Manual

1.Introduction：

This DMX controller has 32 Channels. It could edit 16 scenes and have two working modes, namely

AUTO and MANUAL mode. This DMX can control various lighting fixtures by sending out DMX signal.

2.Specification：

Model：DMX-32

Model Name：DMX controller

Power Input： DC 9V /500MA

3.Control Panel：

scene1—16 program

blackout page mode

PAGE 1
DMX-32 User Manual 1.Introduction： This DMX controller has 32 Channels. It could edit 16 scenes and have two working modes, namely AUTO and MANUAL mode. This DMX can control various lighting fixtures by sending out DMX signal. 2.Specification： Model：DMX-32 Model Name：DMX controller Power Input： DC 9V /500MA 3.
PAGE 2
4.Operating Instruction： 1. Programming 1>. Delete all the previously set Scenes. Steps: Hold down the PROGRAM key first, and then click the SCENE selection key 1,5,6,8 orderly. The program indicator will light, which means the controller is at an editable stage, meanwhile it means that all the previously set scenes are deleted. 2>. Edit new Scenes Note: This controller can edit a maximum of 16 Scenes at a time. Users can find numbers 1-16 on the control interface, which representing 1-16 scenes.