Professional Lighting Technology DMX Strobe ST7500DMX User Guide Please read these instructions carefully before use 1B
1. Introduction TABLE OF CONTENTS Congratulations on the purchase of your new strobe light. We are confident you will enjoy many trouble free hours with this unit. To assist with the care and use of the product we have prepared this short guide. 1. Introduction 2. Safety Precaution 2. Safety Precaution 3. Technical Specifications 4. General Functions 5. How To Change The Lamp 6. How To Control the Unit A. By Master/Slave Built In Preprogrammed Function B. By Easy Controller C.
Installation The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. Make sure that the bracer can support the weight more than 10 times of the unit. And use safety chain which can hold over 12 times weight of the unit when you fix the equipment. The equipment must be fixed by professionals. And it must be fixed at a place where is out of the touch of human and has no one pass by or sit down. 5.
Chase pattern in 4-light show mode: 4. Take out the old lamp and Pattern 1 1234 Full on replace the new one to the Pattern 2 1-2-3-4 ― 4-3-2-1 Pattern 3 1-2-3-4-4-3-2-1 Pattern 4 12-34 ― 23-14 Pattern 5 1-12-123-1234-123-12-1-stop ― 4-43-432-4321-432-43-4-stop Pattern 6 1-2-1-2-3-4-3-4―4-1-4-1-3-2-3-2 fixture. 5. Connect the lamp wire to the terminator. B. By Easy Controller The easy remote control is used only in master/slave mode.
DMX512 Address Chart 8. DMX512 Connection Dip #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 Value 1 2 4 8 16 32 64 128 256 Option • Examples: Channel 1 : dip / on : #1 ( =1 ) Channel 3 : dip / on : #1, #2 ( 1 + 2 = 3) Channel 5 : dip / on : #1, #3 ( 1 + 4 = 5 ) Channel 7 : dip / on : #1, #2, #3 ( 1 + 2 + 4 = 7 ) The DMX512 is widely used in intelligent lighting control, with a maximum of 512 channels. 7.
9. Troubleshooting • If the unit is not functioning well – check main power supply is ‘on’ and check fuses. • If the unit is functioning but lamp does not light - may require replacing lamp. • If the unit is not moving to the music, check the sound-activation adjustment (when applicable) • After trying these solutions, you still have a problem, contact your dealer for technical assistance. • The unit has built-in thermal switch.
