User manual

25
10. Operation
Display Option Function
Addr 001-512 Setting the DMX starting address
VEr bC01 Display of the software version
SoUn on Sound-to-light mode activated
oFF Sound-to-light mode deactivated
LED on Display permanently on
oFF Display switches on only after pushing a button
SLNd NASt Operation as a master device
SL 1 Operation as a slave device (normal slave operation)
SL 2 Operation as a slave device (inverted slave operation)
ShNd SP01 All automatic effects alternatingly
SP02 Automatic effect 1
SP03 Automatic effect 2
SP04 Automatic effect 3
SP05 Automatic effect 4
SP06 Automatic effect 5
dISP dISP Display aligned normally
dSIP Display alignment turned by 180°
ChNd 1Ch 1-channel DMX operation
6Ch 6-channel DMX operation
b) Use with an External DMX Controller
Each DMX device in a DMX chain requires a so-called DMX starting address to be clearly identied by the controller.
This DMX starting address species the rst DMX channel to which the effect light responds. The remaining control
channels come after this rst DMX channel (DMX starting address).
The effect light requires one or six free DMX channels.