Operation Manual

4. Safety Information

• The product must not be subjected to strong mechanical stress.

• Do not place any open sources of ﬁ re such as burning candles on the device.

• Consult an expert when in doubt as to the operation, the safety or the connection of the device.

• Do not leave packing material unattended. It may become a dangerous toy for children.

• Please observe the additional safety instructions in each individual section of these operating instructions as

well.

• Also observe the safety and operating instructions of all other devices connected to this device.

• In commercial or public facilities, a number of regulations, e.g. for the prevention of accidents, as laid down by

the professional trade association for electrical equipment and devices must be observed. You as the opera-

tor must enquire at the appropriate authorities and adhere to the applicable laws and regulations.

• If you are not sure about the correct connection or if questions arise which are not covered by the operating

instructions, please do not hesitate to contact our technical support or another specialist.

5. Product Features

• XLR microphone input

• Mono channel, stereo channel and CD/TAPE in-/output

• Low-cut ﬁ lter (ME1002 and ME1202)

• +48V phantom infeed (switchable)

• SEND FX (ME1002 and ME1202)

• Headphone output

• LED level display

• CLIP LEDs

• CONTROL ROOM output (ME1002 and ME1202)

• 3-band EQ in the mono channels (ME1002 and ME1202)

• 2-band EQ in the mono channel (ME502FP)