Operation Manual

6. Connections and Control Elements

Outputs and Mains Adapter Socket

1) MAIN OUT

The mixer’s MAIN OUT output signal is applied to these asymmetric 6.3 mm jack outputs. A

PA ampliﬁ er can be connected here. The output level is set via the MAIN MIX slider. In the

ME502 mixer, the output level is set via the MAIN MIX rotary control.

2) CTRL ROOM OUT (ME1002 and ME1202)

The mixer’s CONTROL ROOM output signal is applied to these asymmetric 6.3 mm jack

outputs. The CONTROL ROOM signal is identical with the headphones signal. The CON-

TROL ROOM output is usually used for the monitor system. The output level is set via the

PHONES control.

3) Headphone socket

Connection socket for stereo headphones (6.3mm jack plug).

Turn the PHONES control to the “-∞” position before plugging in, unplug-

ging or putting on the headphones or before switching the mixer on or

off. There is a danger of damage to your hearing from excessive volume at

the headphones output.

4) Mains adapter socket

The included mains adapter is connected to this socket. The connection is used to supply the device with power.

The mixer has no main switch. The mixer is operational once the included mains adapter is

connected to the device and the mains socket.

MAIN OUT

CTRL ROOM OUT

PHONES