User Guide

Using the WinGuard Scanner
128 Dr Solomon’sAnti-Virus
Choosing Detection options
TheWinGuard scanner does notstartwiththe E-mailScanmoduleenabledby
default because it needs to know which e-mail system you use. Once you
configure it for use with your regular e-mail client, the module will use your
MAPI profile, or yourcc:Mail user name and password, tolog onto yourmail
accountwheneveritstartsascansession.
If you have already started and logged into your e-mail system, the module
will simply workwithin thesession you've created.If, however,you have not
yet logged into your e-mail system, the module will prompt you to choose a
profile or enter account information as soon as a scan session starts, even
before you've logged into your e-mail account. This also can occur when you
start your computer,if you do not have your e-mail client program set to load
at startup.
If you switch profiles or log into a different account—perhaps in another
domain—the module will ask you to choose the profile you want to use or to
supply a new user name and password to log on to the mail system.
To choose configuration options for this page, follow these steps
1. Select the Enable Scanning of e-mail attachments checkbox.
The options in the rest of the property page activate (Figure 4-18).
Figure 4-18. E-mail Scan Properties dialog box - Detection page