User Guide

Using the WinGuard Scanner
140 Dr Solomon’sAnti-Virus
Figure 4-24. E-mail Scan Properties dialog box - Report page
2. Select the Log to file checkbox.
By default, the module writes log information to the file
WEBEMAIL.TXTintheDrSolomon’sAnti-Virusprogramdirectory.you
canenteradifferentnameandpathinthetextboxprovided,orclick
Browse to locate a suitable file elsewhere on your hard disk or on your
network.
3. Selectthe Limit size of log file to checkbox to minimize thelog file size,
then enter a value for the file size, in kilobytes, in the text box provided.
If you do not select this checkbox, the log file can grow to as large a size
as your disk space or file system permits.
Enter a value between 10
KB and 999KB.Bydefault,theSystemScan
module limits the file size to 100
KB. If the data in the log exceeds the file
sizeyouset, the moduleerases theexistinglogandbeginsagainfromthe
point at which it left off.
4. Select the checkboxes that correspond to the information you want the
module to record in its log file. The module usually will record the data
when the scan session ends or when you shut your system down.
You can choose to record any of this information:
• Virus Detection.Selectthischeckboxtohavethelogfilerecordhow
many viruses the module finds during each scan session. Clear the
checkbox to leave this information out of the log file.