User Guide

Creating and Configuring Scheduled Tasks
230 Dr Solomon’sAnti-Virus
Figure 6-9. Add Scan Item dialog box
To scan your entire computer or a subset of the drives on your
systemor your network,clickthe Select item to scan button, then:
a. Choose a scan target from the list provided. Your choices are:
– My Computer.This tellsthe application toscan all drives
physicallyattachedtoyourcomputerorlogicallymapped
via Windows Explorer to a drive letter on your computer.
– All removable media. This tells the application to scan
only floppy disks, CD-ROM discs, Iomega ZIP disks, or
similar storage devices physically attached to your
computer.
– All fixed disks. This tells the application to scan hard
disks physically connected to your computer.
– All network drives. This tells the application to scan all
drives logically mappedvia Windows Explorerto adrive
letter on your computer.
b. Click OK to close the dialog box.
Toscanaparticulardiskorfolderonyoursystem,clicktheSelect
drive or folder to scan button,then:
a. Type inthe textbox provided the drive letteror the path to the
folder you want scanned, or click Browse to locate the scan
target on your computer.
 NOTE: You may not use Universal Naming Convention
(UNC) notation to specify a network disk as a scan target
for scheduled tasks. Doing so will result in an “Invalid
Path” error. You may use UNC notation to specify scan
targets for operations you run directly with the Dr
Solomon’s Anti-Virus application.