User Guide

Updating and Upgrading Dr Solomon’sAnti-Virus
256 Dr Solomon’sAnti-Virus
Figure 7-2. Automatic Update Properties dialog box -
Update Options page
• Change definitions foranexisting update site.Select a site shown in
the update site list, then click Edit to open the Automatic Update
Properties dialog box (Figure 7-2). Make the changes you want to
make, then click OK to save them and return to this dialog box. To
see descriptions and instructions for configuring the available
options, see “Configuring update options” on page 258.
• Remove anexistingsite from theupdate sitelist. Select a siteshown
in the update site list, then click Delete.
• Specifytheorderin whichtheAutoUpdateutilityshouldconnectto
the listed sites. To position a site so that the utility tries it earlier,
select the site, then click Move Up. To designate a site as lower in
priority, select the site, then click Move Down.
• Update your files immediately from the sites listed in the update
list,using defaultconfigurationoptions ortheoptionsyou chosefor
this task. Click Update now.
To use this function, you must have configured enough of the
necessary options for theAutoUpdate utility to locate the listed site
and, if necessary, log on to it. See “Configuring update options” on
page 258 to learn how to specify the options you need.
If AutoUpdate cannotconnect to the listed site after three attempts,
or if it does not find new .DAT files, it will connect to each of the
other sites listed until itfinds the most current .DAT files available.