Installation guide

135
Security Management Center Commands
sgOnlineReplication
[login=<login name>]
[pass=<password>]
[active-server=<name of active
Management Server>]
[standby-server=<name of
additional Management Server>]
[standby-server-address=<IP
address of additional Management
Server>]
[-nodisplay]
[-h|-help|-?]
Replicates the Management Server’s database from the active
Management Server to an additional Management Server. The
Management Server to which the database is replicated must be
shut down before running this command. Restart the
Management Server after running this command.
Note! Use this script to replicate the database only if the
additional Management Server’s configuration has been
corrupted, the additional Management Server’s certificate has
expired, or in new SMC installations if the automatic database
replication between the Management Servers has not
succeeded. Otherwise, synchronize the database through the
Management Client. See the McAfee SMC Administrator’s Guide
for more information.
login defines the username for the account that is used for
this operation. If this parameter is not defined, the username
root is used.
pass defines the password for the user account.
active-server option specifies the IP address of the active
Management Server from which the Management database is
replicated.
standby-server option specifies the name of the additional
Management Server to which the Management database is
replicated.
standby-server-address option specifies the IP address
of the additional Management Server to which the Management
database is replicated.
-nodisplay sets a text only console.
-h, -help, or -? displays information on using the script.
sgReinitializeLogServer
Note! This script is located in <installation directory>/
bin/install.
Creates a new Log Server configuration if the configuration file
has been lost.
sgRestoreArchive <ARCHIVE_DIR>
Restores logs from archive files to the Log Server. This command
is available only on the Log Server.
ARCHIVE_DIR is the number of the archive directory (0 – 31)
from where the logs will be restored. By default, only archive
directory 0 is defined. The archive directories can be defined in
the <installation directory>/data/
LogServerConfiguration.txt
file:
ARCHIVE
_DIR_xx=
PATH.
Table A.1 Security Management Center Command Line Tools (Continued)
Command Description