Installation guide
159
Example Headquarters Intranet Network
Example Headquarters Intranet Network
Illustration C.2 Example Headquarters Intranet Network
HQ IPS Cluster
In the example scenario, HQ IPS Cluster is an inline serial cluster located in the Headquarters 
network. The cluster consists of two IPS engine nodes: Node 1 and Node 2.
Table C.1 IPS Cluster in the Example Scenario
Network 
Interface
Description
Capture 
Interfaces
The HQ IPS Cluster’s Capture Interface on each node is connected to a SPAN port 
in the Headquarters Intranet switch. All the traffic in this network segment is 
forwarded to the SPAN ports for inspection.
Inline Interfaces
The cluster is deployed in the path of traffic between the Firewall and the 
Headquarters Intranet switch. All the traffic flows through each node’s Inline 
Interface pair.
Normal Interfaces
The Normal Interface on each node is connected to the Headquarters Intranet 
switch. Node 1’s IP address is 172.16.1.41 and Node 2’s address is 
172.16.1.42. This Normal Interface is used for control connections from the 
Management Server, sending events to the HQ Log Server, and for sending TCP 
resets.
Heartbeat 
Interfaces
The nodes have dedicated Heartbeat Interfaces. Node 1 uses the IP address 
10.42.1.41 and Node 2 uses the IP address 10.42.1.42.
SPAN
Management 
Network
10.42.1.42
172.16.1.41
10.42.1.41
172.16.1.42
Headquarters 
Intranet
HQ Firewall
172.16.1.1
Node 2 Node 1
Switch










