Installation guide
92
Chapter 10  Configuring Routing and Installing Policies
Installing the Initial Policy
To be able to inspect traffic, the engines must have a policy installed on them. Installing one of 
the predefined policies provides an easy way to begin using the system. You can then fine-tune 
the system as needed. The following table describes the default policy elements for IPS and 
Layer 2 Firewall engines.
Table 10.1  Default Policy Elements for IPS and Layer 2 Firewall Engines
Element 
Type
Default 
Element 
Name
Description
IPS 
Template 
Policy
IPS Template
A Template Policy that contains the predefined Access rules necessary 
for the IPS engine to communicate with the SMC and some external 
components.
The IPS Template Policy uses Inspection rules from the High-Security 
Inspection Policy. The IPS Template Policy provides an easy starting point 
for determining what kinds of rules your system needs.
IPS Policy
Customized 
High-Security 
Inspection 
IPS Policy
An IPS Policy that is based on the IPS Template. The Customized High-
Security Inspection IPS Policy contains a set of customized rules that 
were used when the IPS was tested at ICSA Labs and NSS Labs.
Default IPS 
Policy
An IPS Policy that is based on the IPS Template. The Default IPS Policy 
does not add any rules to those defined in the IPS Template. It allows 
you to install the predefined rules in the IPS Template on the IPS engine 
right after installation (since Template Policies cannot be installed on the 
engines).
Layer 2 
Firewall 
Template 
Policy
Layer 2 
Firewall 
Template
A Template Policy that contains the predefined Access rules necessary 
for the Layer 2 Firewall to communicate with the SMC and some external 
components.
The Layer 2 Firewall Template uses Inspection rules from the No 
Inspection Policy. The rules in the No Inspection Policy do not enforce 
inspection.
Layer 2 
Firewall 
Inspection 
Template
A Template Policy that is based on the Layer 2 Firewall Template. It uses 
Inspection rules from the High-Security Inspection Policy. 
The Layer 2 Firewall Inspection Template enables deep inspection for all 
traffic.










