Product guide

3
Configuration for standalone systems
Configure VirusScan Enterprise for Storage to add NetApp filers and to scan the storage appliances
using the ICAP server.
Contents
Configure NetApp filers scan settings
Configure the ICAP settings
Static IP address for scanners
Configure the service dependency
View filers scan statistics
Configure NetApp filers scan settings
Configure the NetApp filer AV scanner options such as, add filers, define file types to scan or exclude,
and define actions for threat items. These configurations are applied to the NetApp filers that are
connected to McAfee VirusScan Enterprise for Storage.
Before you begin
Make sure that Clustered Data ONTAP Antivirus Connector software is installed and running
on the system to connect the scan server to the Cluster-Mode filer.
To verify this, on the Windows taskbar, click Start | Control Panel | Administrative Tools | Services,
then double-click ONTAP AV Connector. The status of the service appears as Running.
Task
1
Log on to the system as an administrator.
2
On the Windows taskbar, right-click the McAfee menulet , then select VirusScan Console.
3
On the VirusScan Console, double-click Network Appliance Filer AV Scanner.
3
McAfee VirusScan Enterprise for Storage 1.1.0 Product Guide
17