User Manual

100 McAfee Total Protection
Configure a new system service port
You can configure a new network service port on your computer
that you can open or close to allow or block remote access on
your computer.
1 On the McAfee SecurityCenter pane, click
Internet &
Network, then click Configure.
2 On the Internet & Network Configuration pane, under
Firewall protection is enabled, click Advanced.
3 On the Firewall pane, click
System Services.
4 Click
Add.
5 In the System Services pane, under
Add System Service
Rule, enter the following:
 System Service name
 System Service category
 Local TCP/IP ports
 Local UDP ports
6 Do one of the following:
 To open the port to any computer on a trusted, standard,
or public network (for example, a home network, a
corporate network, or an Internet network), select
Trusted, Standard, and Public.
 To open the port to any computer on a standard network
(for example, a corporate network), select Standard
(includes Trusted).
7 If you want to send this port's activity information to another
Windows network computer that shares your Internet
connection, select
Forward this port's network activity to
network computers that use Internet Connection
Sharing.
8 Optionally, describe the new configuration.
9 Click
OK.
Note: If your computer has a program that accepts either web or
FTP server connections, the computer sharing the connection
may need to open the associated system service port and allow
forwarding of incoming connections for those ports. If you are
using Internet Connection Sharing (ICS), you also need to add a
trusted computer connection on the Networks list. For more
information, see Add a computer connection.