User Manual

Chapter 18 McAfee Total Protection 91
 Select
Range, and then enter the starting and ending IP
addresses in the
From IP Address and To IP Address
boxes. If your computer connection is on an IPv6 network,
enter the starting IP address and the prefix length in the
From IP Address and Prefix Length boxes.
7 Under
Type, do one of the following:
 Select
Trusted to specify that this computer connection is
trusted (for example, a computer in a home network).
 Select
Standard to specify that this computer connection
(and not the other computers in its network) is trusted (for
example, a computer in a corporate network).
 Select
Public to specify that this computer connection is
public (for example, a computer in an Internet café, hotel,
or airport).
8 If a system service uses Internet Connection Sharing (ICS),
you can add the following IP address range: 192.168.0.1 to
192.168.0.255.
9 Optionally, select Rule expires in, and enter the number of
days to enforce the rule.
10 Optionally, type a description for the rule.
11 Click
OK.
Note: For more information about Internet Connection Sharing
(ICS), see Configure a new system service.
Add a computer from the Inbound Events log
You can add a trusted or standard computer connection and its
associated IP address from the Inbound Events log.
1 On the McAfee SecurityCenter pane, on the Common Tasks
pane, click
Advanced Menu.
2 Click
Reports & Logs.
3 Under
Recent Events, click View Log.
4 Click
Internet & Network, and then click Inbound Events.
5 Select a source IP address, and under
I want to, do one of the
following:
 Click
Add this IP as Trusted to add this computer as
Trusted in your
Networks list.
 Click
Add this IP as Standard to add this computer
connection as Standard in your
Networks list.
6 Click
Yes to confirm.