User Manual

94 McAfee Total Protection
Banning computer connections
You can add, edit, and remove banned IP addresses in the
Banned IPs pane.
You can ban computers that are associated with unknown,
suspicious, or distrusted IP addresses from connecting to your
computer.
Since Firewall blocks all unwanted traffic, it is normally not
necessary to ban an IP address. You should ban an IP address
only when you are sure that an Internet connection is a threat.
Make sure that you do not block important IP addresses, such as
your DNS or DHCP server, or other ISP-related servers.
Add a banned computer connection
You can add a banned computer connection and its associated IP
address.
Note: Ensure that you do not block important IP addresses, such
as your DNS or DHCP server, or other ISP-related servers.
1 On the McAfee SecurityCenter pane, click Internet &
Network, then click Configure.
2 On the Internet & Network Configuration pane, under
Firewall protection is enabled, click Advanced.
3 On the Firewall pane, click
Banned IPs.
4 On the Banned IPs pane, click
Add.
5 If the computer connection is on an IPv6 network, select the
IPv6 check box.
6 Under Add Rule, do one of the following:
 Select
Single, and then enter the IP address in the IP
Address box.
 Select
Range, and then enter the starting and ending IP
addresses in the
From IP Address and To IP Address
boxes. If your computer connection is on an IPv6 network,
enter the starting IP address and the prefix length in the
From IP Address and Prefix Length boxes.
7 Optionally, select
Rule expires in, and enter the number of
days to enforce the rule.
8 Optionally, type a description for the rule.
9 Click
OK.
10 Click
Yes to confirm.