Installation guide

23
Set up the Internet connection
If you skipped configuring connection settings, or have additional
port connections to configure, continue with this procedure.
Otherwise, go to Register your UTM Firewall device on page 24.
NOTE: If you changed the UTM Firewall device’s LAN connection
settings (Set LAN connection settings on page 10), browse to the new
LAN IP address.
1 Choose a port on the UTM Firewall device for your primary
Internet connection.
2 For example, attach Port D to your modem device or Internet
connection medium.
3 From the Network Setup menu, select Network Setup. The
Connections window appears (Figure 13).
Figure 13 Connections window
4
In the row labeled Port D, go to the Change Type column and
use the drop-down list to select your Internet connection type.
5 Refer to the Help and the UTM Firewall Administration Guide for
complete procedures on configuring connections.
6 Click Finish.
uf_SG720_qig_700-2240A00_en-us.fm Page 23 Monday, October 12, 2009 11:56 AM