User Guide

Administrator’s Guide 41
Installing VirusScan Software
To learn more about what each component does, see “What comes with
VirusScan software?” on page 29 of the VirusScan User’s Guide.
11. Choose the option you prefer, then click Next> to continue.
If you chose Custom Setup, you’ll see the panel shown in Figure 2-8.
Otherwise, skip to Step 14 on page 42 to continue with your installation.
Figure 2-8. Custom Setup panel
12. Choose the VirusScan components you want to install. You can:
• Add a component to the installation. Click beside a
component name, then choose This feature will be installed on
local hard drive from the menu that appears. To add a component
and any related modules within the component, choose
This feature, and all subfeatures, will be installed on local
hard drive instead. You can choose this option only if a component
has related modules.
• Remove a component from the installation. Click beside a
component name, then choose This feature will not be
available from the menu that appears.
NOTE: The VirusScan Setup utility does not support the other
options shown in this menu. You may not install VirusScan
components to run from a network, and VirusScan software
has no components that you can install on an as-needed basis.