User Guide

User’s Guide 289
Using the SecureCast Service to Get New Data Files
The SecureCast service alerts you that an InfoPak has arrived with the Flash
message shown at the bottom right corner of Figure D-9.
Ë IMPORTANT: If you are a corporate user and have a high-speed
Internet connection, the window may list Register Now as an already
received InfoPak. Continue with Step 1.
If you have a slower connection, or if there is unusually heavy traffic at
the SecureCast service site or your site, the window might not list any
InfoPaks. In that case, minimize or close the BackWeb window. After
some time, you will receive a Flash message. Click the flashing message,
then continue with Step 2.
To register for the Enterprise SecureCast channel, follow these steps:
1. If you see Register Now listed in the window, double-click it. The
SecureCast service Flash banner appears (Figure D-10).
Figure D-10. SecureCast Flash banner
2. Click the banner. The Network Associates Welcome panel appears
(Figure D-11).
Figure D-11. Network Associates Welcome panel
3. Review the information shown, then click Register Now at the bottom of
the panel.