User Guide

Deploying and Installing VirusScan TC
12 McAfee VirusScan TC
To deploy and install the VirusScan TC program on your computer, follow
these steps:
1. Place the CD-ROM in your server’s drive.
2. On your network, create a shared folder where you will copy the
program files for the target computers to share. The shared folder must
provide “read” accessto every computer on which VirusScan TC will be
installed.
IMPORTANT:OnWindows95andWindows98systems,theshare
mustbeinthesamedomainasthecurrentlylogged-inuser.
3. Copy the following files from the VSCAN_TC folder on the CD-ROM to
the shared folder:
4. Create an SMS or Windows NT login script to perform the following
actions:
• Copy the fiveVirusScan TC files from the shared network folder to
a temporary location on the target computer.
•InvokeSETUP.EXE.
• Reboot the target computer if SETUP.EXE returns 3010.
Rebooting is required if:
– The Microsoft Installer (MSI) demands it.
– Previously installed anti-virus software was removed during
the installation.
– TheproductwasinstalledinaWindowsNTenvironment,thus
introducing McAfee file system drivers to the operating
system.
WARNING:If a reboot is necessary, the system will not be
protected against virus infection until rebooted.
INSTMSIW.EXE LWISETUP.EXE VSCANTC.MCS
INSTMSI.EXE SETUP.EXE