User Guide

Administrator’s Guide 15
Deploying and Installing VirusScan TC
NOTE:You can designate up to eight sites for the VirusScan
TC program installation file, and for the files that install MSI.
This helps assure that the installation procedure will be ableto
locate the required files, even if one or more of the locations is
temporarily off-line. Listing the sites in order of proximity
helps assure that the installation procedure will contact the
most preferred location first.
7. Set policy for (configure) the on-access scanner.
8. Deploy the installation policy and install the VirusScan TC program.
For tasks1, 2, and6, see the ePolicy Orchestrator v1.1 Administrator’s Guide.For
tasks 3–7, see the following sections in this chapter.
1. Install ePolicy Orchestrator software
Before you can perform the Optimized Installation, you must first install and
configurethe ePolicyOrchestratorv1.1 softwareon your server.For complete
instructions, see the ePolicy Orchestrator v1.1 Administrator’s Guide,whichyou
can find on the CD-ROM.
•Toinstall the program for the first time, follow the instructions for
“First-time Installation.”
•Toupgrade the program from the previous version, follow the
instructions for “Upgrading Version 1.0 to Version 1.1.”
2. Install the ePolicy Orchestrator agent
You must install the ePolicy Orchestrator agent on all the target computers
before youcan perform theOptimized Installation. Forcomplete instructions,
see the ePolicy Orchestrator v1.1 Administrator’s Guide, which you can find on
the CD-ROM.
3. Copy program configuration files to the software repository
In order to configure and deploy the VirusScan TC software, you must place
the.NAP files (NetworkAssociatesPackage)on the serverwhereyouinstalled
and configured the ePolicy Orchestrator software. These files are identifiable
by their extension, .NAP.
• LWI100EN.NAP Installer
• VTC600EN.NAP VirusScan TC
IMPORTANT: In order to install LWI100EN.NAP in the software
repository, it must be installed from a location that also includes
LWISETUP.EXE. No user interaction with LWISETUP.EXE is required.