User Guide

Deploying and Installing VirusScan TC
24 McAfee VirusScan TC
3. Make sure that Logtofileis selected.
4. Bydefault,thenameofthelogfileisInstall.log.Thedefaultpathof
the log file is:
<drive>:\Program Files\McAfee\VirusScan TC\Install.log
Here,<drive>referstotheclientdiskwheretheVirusScanTCsoftwareis
installed.
If you prefer, you can enter a different file name or path.
5. By default, the maximum size for the log file is set to 1,024
KB (1MB). You
can enter any value between 10
KB and 32,767KB.
TIP: If the data in the log exceeds the file size you set, the oldest 20
percent of the log text isdeleted to make room for new information
that isadded to the end of the file. If you place no size restriction on
the log file, you run the risk of it consuming all available space on
the drive where it is located.
6. Bydefault, Enable Verbose is selected. If you want the log to report
every step in a procedure, leave it unchanged. Otherwise, deselect it.
Figure2-7and Figure 2-8 showsamples of an event recorded in verbose
and non-verbose mode, respectively.
Figure 2-7. Verbose Log
Figure 2-8. Non-verbose Log
7. When youhavefinished settingLog Activity options,clickApply tosave
your selections for deployment. You return to the Installer
Configurations property pages.