User Guide

Administrator’s Guide 25
Deploying and Installing VirusScan TC
WARNING: If youdo notclickApply,theoptionsthatyouselected
are ignored.
6. Select reboot options
Using the ePolicy Orchestrator Agent Options page, you can specify the way
you want the installer to respond to rebooting requirement. The options are:
• Prompt user when software installation requires reboot.
and/or
• Automatic reboot with timeout.
SeeChapter 5(TheAgent)in the ePolicyOrchestrator Administrator’sGuide
for information about selecting these options.
7. Set policy for the on-access scanner
Youcan set policy forthe on-accessscanner at any time. Administrator’smay
find it convenient to configure the scanner as part of the initial deployment
and installation activity. However, it can be done at any time.
For a complete discussion of configuring the on-access scanner, see “Setting
Policy for On-Access Scanning” starting on page 29.
8. Deploying the installation policy
Afteryou havefinishedmaking configuration choicesforthe InstallSites,MSI
Sites, and Log Activitypropertypages, youarereadyto distribute thepolicies
and install VirusScan TC on the target computers.
NOTE:In most situations, you will want to configure the on-access
scanner before deploying and installing the VirusScan TC program. For
detailed information about configuring this component, see Chapter 3,
“Setting Policy for On-Access Scanning,” starting on page 29.
You can configure AutoUpdate before you deploy the VirusScan TC
program. However,AutoUpdate cannotrun until you have deployed the
VirusScan TC program and it has been installed on the client machines.
For information about configuring this component, see Chapter 4,
“Updating and Mirroring Tasks,” starting onpage 49.