User Guide

Administrator’s Guide 59
Updating and Mirroring Tasks
18. Verify that Logtofileis selected.
19. The name of the log files are UPDATE.LOG and MIRROR.LOG.The
default path of the logfiles is:
<drive>:\Program Files\McAfee\VirusScan TC\
Here, drive refers to the client disk where the VirusScan TC software is
installed.
If you prefer, you can enter a different name or path.
20. By default, the maximum size for the log file is set to 1,024
KB (1MB). You
can enter any value between 10
KB and 32,767KB.
TIP: If the data in the log exceeds the file size you set, the oldest 20
percentofthe logtextisdeletedto make roomfor new information.
If you place no size restriction on the log file, you run the risk of it
consuming all available space on the drive where it is located.
21. Verify that Enable Verbose is selected if you want the log to report
every step in a procedure. A sample of an event recorded in verbose
mode is:
Figure 4-6. Verbose log
Figure 4-7. Non-verbose log
22. When you have finished setting Log Activity options, click OK.Your
changes are saved for deployment, and you are returned to the ePolicy
Orchestrator Scheduler dialog box (see Figure 4-8 on page 60).