User's Manual

McCall

Standard Labor Guidelines To Repair Or Replace Parts On McCall Equipment

Advice and recommendations given by McCall Service Technicians do not constitute or guarantee any special coverage.

• A maximum of 1-hour is allowed to

diagnose a defective component.

• A maximum of 1-hour is allowed for retrieval of parts not in stock.

• A maximum travel distance of 100 miles round trip and 2-hours will be reimbursed.

• Overtime, installation/start-up, normal control adjustments, general maintenance, glass breakage, freight damage, and/or

correcting and end-user installation error will not be reimbursed under warranty unless pre-approved with a Service Work

Authorization from McCall. You must submit the number with the service claim.

Labor Of 1-Hour Is Allowed To Replace:

• Thermostat • Contactor/Relay

• Door Jamb Switch • Evaporator/Condenser Fan Motor and Blade

• Solenoid Coil • Circulating Fan Motor and Blade

• Hi-limit/Thermal Protector Switch • Microprocessor Control

• Fan Delay/Defrost Termination Switch • Transformer

• Compressor Start Components and Overload Protector • Door Hinges, Locks, and Gaskets

• Defrost Timer • Condensate Element

• Thermometer

Labor Of 2 Hours To Replace:

• Drawer Tracks/Cartridges • Defrost Element

• Pressure Control • Heating Element

• Solenoid Valve • Locate/Repair Leak

Labor Of 3 Hours To Replace:

• EPR or CPR Valve • Condenser or Evaporator Coil

• Expansion Valve

Labor Of 4 Hours To Replace:

• Compressor

This includes recovery of refrigerant and leak check.

$55.00 maximum reimbursement for refrigerant recovery (includes recovery machine, pump, torch, oil, flux, minor fittings,

solder, brazing rod, nitrogen, or similar fees.)

Refrigerants:

• R404A A maximum of $15.00/lb. or $1.00/oz. will be reimbursed.