Installation Guide

McCULLOCH ROB R600 McCULLOCH ROB R1000
Charging station √ √
Power supply √ √
Loop wire 150 m 200 m
Low voltage cable √ √
Pegs 200 pcs 400 pcs
Connectors 3 pcs 3 pcs
Charging station screws 3 pcs 3 pcs
Allen key √ √
Measurement gauge √ √
Couplers 5 pcs 5 pcs
Operator's manual and Quick guide √ √
Extra blades 3 pcs 3 pcs
Alarm decal √ √
Cable markers √ √
Installation of the robotic lawnmower involves four main
components:
1. A robotic lawnmower that mows the lawn by
essentially operating in a random pattern. The robotic
lawnmower is powered by a maintenance-free battery.
2. A charging station, to where the robotic lawnmower
returns when the charge level in the battery becomes
too low.
3. A power supply, which is connected between the
charging station and a 100-240V wall socket. The
power supply is connected to the wall socket and to
the charging station using a 10 m long low voltage
cable. No parts of the power supply must be changed
or tampered with. For example the low voltage cable
must not be shortened or extended. Low voltage
cables with 3 m and 20 m length are available as
optional accessories.
4. Loop wire, laid in a loop around the robotic
lawnmower’s working area. The loop wire is laid
around the edges of the lawn and around objects and
plants that the robotic lawnmower must not run into.
The loop wire is used both as a boundary wire and a
guide wire.
175 - 001 - 17.03.2017 9