Installation Guide
Message Cause Action
Next start hh:mm
The timer setting prevents the robotic lawn-
mower from operating.
Change the timer settings. See
Timer on page
23
.
The rest period is in progress. The robotic
lawnmower has an inbuilt standby period ac-
cording to the Standby time table.
This behaviour is normal and no action is re-
quired. See
Standby on page 33
.
The day’s mowing is
complete
The rest period is in progress. The robotic
lawnmower has an inbuilt standby period ac-
cording to the Standby time table.
This behaviour is normal and no action is re-
quired. See
Standby on page 33
.
Lifted
The lift sensor has been activated as the mow-
er has become trapped.
Free the mower.
Collision sensor prob-
lem, front/rear
Mower body can not move freely around its
chassis.
Check that the mower body can move freely
around its chassis.
Wheel drive problem,
right/left
Grass or other object is wrapped around the
drive wheel.
Clean the wheels and around the wheels.
Alarm! Mower switch-
ed off
The alarm was activated because the mower
was switched OFF.
Adjust the mower security level in the Security
menu.
Alarm! Mower stopped
The alarm was activated because the mower
was stopped.
Alarm! Mower lifted
The alarm was activated because the mower
was lifted.
Alarm! Mower tilted
The alarm was activated because the mower
was tilted.
Temporary battery
problem
Temporary battery or software related issue in
the mower.
Restart the mower. Disconnect and reconnect
the battery.
Charging current too
high
Wrong or faulty power supply unit. The message may require action by authorized
service technician.
Indicator lamp in the charging station
For a fully functional installation, the indicator lamp in the charging station must emit a solid green light. If something else
appears, follow the troubleshooting guide below.
If you still need help with troubleshooting, please contact your local McCULLOCH representative.
Light Cause Action
Solid green light
Everything in order No action required
Green flashing light
The signals are good and
ECO mode
is activa-
ted.
No action required. For more information on
ECO mode
, see
Settings on page 27
.
40 175 - 001 - 17.03.2017