Use and Care Guide

The following section summarises the menu selections
found in the main menu and provides more detailed
information about how each function is used and which
setting options are available.
3.12.1 Main menu
Timer
The timer function is an ideal tool to
control which periods the robotic
lawnmower should not mow, for example
when children are playing in the garden.
Installation (only for ROB R800, ROB
R1000)
This menu function is used to customize
the installation. For many working areas
there is no need to alter the factory
settings, but depending on the lawn
complexity the mowing result can be
improved by making manual settings.
Security
In this menu, settings relating to security
and the connection between the robotic
lawnmower and the charging station can
be made. There are 3 security levels to
choose from: Low, Medium, High .
Settings
This selection allows you to make
changes to the general robotic lawnmower
settings such as date and time. You can
also turn on/off ECO mode .
3.13 Timer
TIMER
Work hours 1
Work hours 2
Work days
Reset timer
The lawn should not be cut too often to obtain the best
mowing result. When the robotic lawnmower is allowed
to mow too much, the lawn may appear flattened.
Besides, the robotic lawnmower is subjected to
unnecessary wear. If the working area is less than the
robotic lawnmower's area capacity, the quality of the
grass can be further improved if it is cut every other day
instead of a few hours every day. In addition, the grass
benefits from resting completely during at least a three-
day period once a month.
The timer function is also an ideal way to control which
work hours the robotic lawnmower should not mow, for
example, when the children are playing in the garden.
The factory setting of the Timer is 07:00 am - 11:00 pm
Mon - Sun. This is normally a suitable setting for a
working area corresponding to the maximum capacity. If
the working area is less than maximum capacity then
the timer should be used to minimize wear on grass and
lawnmower. When setting the timer manually, calculate
that the robotic lawnmower mows about the listed
amount of the number of square meters per hour and
day listed in table Work capacity. See To set the timer
on page 23 .
The table below provides suggestions for different timer
settings depending on garden size. The times should be
seen as indicative. They may need to be adjusted to suit
the garden and for example grass quality and growth
during the season. Use the table as follows:
• Find a work area that closest matches the size of the
lawn.
• Select an appropriate amount of work days per week
(for some work areas 7 days may be needed).
• Work hours per day shows how many hours a day
the robotic lawnmower will be allowed to work for the
selected amount of work days.
• Suggested time interval shows a time interval that
corresponds to the required work hours per day.
22 - Installation 358 - 002 -