Operation Manual

KEY TO SYMBOLS
78 – English
Symbols
WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator’s manual
carefully and make sure you understand
the instructions before using the machine.
Keep all parts of your body away from hot
surfaces.
Always wear boots and other equipment
described under the heading Personal
protective equipment.
Always wear:
• Hearing protection
• Approved eye protection
A breathing mask should be used when
there is a risk of dust.
This product is in accordance with
applicable EC directives.
Wear protective hair covering to contain
long hair.
Never put hands or other objects into
blower housing to avoid serious injury
from the rotating impeller.
Never wear loose-fitting clothing, jewellery
or similar that can get caught in moving
parts.
Only use the machine for the purpose it
was intended for.
The blower can forcibly throw
objects that can bounce back.
This can result in serious eye
injuries if the recommended
safety equipment is not used.
The blower operator
must ensure that no
people or animals come
closer than 15 metres.
When several operators
are working at the same site a safety distance of at least
15 metres must be in effect.
Air purge
Noise emission to the environment
according to the European
Community’s Directive. The machine’s
emission is specified in the Technical
data chapter and on the label.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
Switch off the engine by moving the stop
switch to the STOP position before
carrying out any checks or maintenance.
Switch on the engine by moving the stop
switch to the ON position before starting.
Always wear protective gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.
Refuelling.
Choke lever in ”open position”.
Choke lever in ”closed position”.
Z 87
I