Owner`s manual

STEP 4: INSTALL DISCHARGE

DEFLECTOR

● “Position discharge deflector (item C) as shown in FIG. 4-

iassY.

. Attach deflector to shredder housing using the four (4) l/4-

20 x .50 one-way screws (item D), eight (8) fiatwashers

(iem E), and four(4) locknuts (item F). (See FIG. 4-ASSY)

● Tighten locknuts securely.

STEP 5: ASSEMBLY OF COLLECTOR BAG

The Chipper/Shreddercomes equipped with one of two types of

collector bag to catch the shredded material.

To atta~h the bag, place the opening of the bag around the

discharge opening (on units having a chute deflector, pull

the bag overthe deflector) until the drawstring is positioned

behind upper and lower tabs on housing. Depress the

plunger on the drawstring lock and pull on the drawstring

until the bag istight around the discharge opening. Release

plunger to retain drawstring and bag in position. See FfG.

5-ASSY.

The Chipper/Shredder may be operated without collector

bag installed. When operating without bag, stay dear of

discharge opening and do not allow material to collect and

restrict discharge of material.

.-. .

..291

,,.,