Owner`s manual

,\:-,.

<NOW YOUR CIMPPER-SHREDDER

●

WAOTHIS OWNER’S MANUALAND SAFETY RULES BEFORE OPERATING YOUR CHIPPER-SHREDDER.

hnpare the illustrations with yourchippar-shradderto familiarize yoursetf with the Iocat”mriof varkius controls and adjustments. Save

his manual for future reference.

MEEK ANSI SAFETY STANDARDS

Chipper-Shredders conform to the safety standards of the American National Standards Institute.

3PERAllNG CONTROLS

(D) SHREDDER HOPPER -Used for shredding small branches

SEE FIGe 1 OP) and other small debris.

(E) SHREDDER HOPPER RELEASE KNOB -Releases Shrad-

:) CHIPPER CHUTE- Usad forchippingbranches

derHopparto rotatadtogroundpositiinforeasy rakingofleaves

2) COLLECTOR BAG- Used tocollect all chipped,shredded

and other debris into the hopper.

:‘ vacuumed debrisfor easy disposaf.

(F) STARTER HANDLE - Used to manuallystafi the engine.

C) ENGINE CONTROLS - Throttle and Choke controls are

xatad here. (see engine manualfor ind”widualcontrols)

*ORE

USING YOUR CHIPPER-SHREDDER, AGAIN REFER TO THE “SAFETY RULES AS SHOWN ON

XGE 2 OF THIS MANUAL. ALWAYS BE CAREFUL.

~xlmum

noise level measured in a distance of Im from shredder and 1.6m above ground = 97db(A) (as per

N4S63!5).

The operation of any chipper-shredder can result in foreign objects being thrown into the eyes,

which can resuft in severe eye damage. Always wear safety glasses or eye shields while chipping

or shredding, or performing any adjustments or repairs. We recommend Wide Vision Safety Mask

for over spectacles or standard glasses.

. .

... . . ..:

..:.

292