Handheld Steam Cleaner Instruction Manual Model MC1220 1
Dear Customer, Thank you for purchasing the McCulloch Handheld Steam Cleaner. This product, like all the products in the McCulloch line, is designed to save you cleaning time. It will also save you money because you will eliminate the need to use harsh chemicals in the cleaning process. Imagine a product that not only cleans but also reduces or eliminates Microbiological counts, reduces smoke and others odors from virtually any material in your home.
IMPORTANT SAFETY INSTRUCTIONS Read this instruction manual before using the appliance. Always follow basic safety precautions, including the following: 1. Only use accessories recommended by the manufacturer. 2. To protect against risk of electrical shock, do not immerse the appliance in water or other liquid. 3. Do not allow the steam cleaner to be used by children. Use caution when using near children or pets. 4.
Getting to Know Your MC1220 The following features and accessories should have come with your Handheld Steam Cleaner . If any accessories are missing please see the Service Call section of this manual. 6 5 1 2 3 4 Figure 1 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16.
Learning About Your Steamer x The Safety Cap (1) provides access to the Boiler for water filling. It also contains a pressure relief mechanism for safety. x The Steam Button (2) operates a valve which controls the release of steam. x The Carrying Handle (3) allows for one-handed operation. x The Steam Ready Light (4) is illuminated when the Boiler is heating and goes out when the steam is ready. x The Steam Jet Nozzle (5) provides a concentrated stream of powerful steam for cleaning.
Assembly Instructions Attaching the Steam Jet Nozzle or Large Steam Nozzle To use your Handheld Steam Cleaner you need to attach the Steam Jet Nozzle or Large Steam Nozzle to the main unit. The following procedure works for both. (Refer to Figure 3). 1. Rotate the attachment so that the tabs (B) align with the slots on the main unit. This will bring the Single Alignment Mark (A) to the top. Insert the nozzle as far as it will go and then rotate, in either direction, by 90ยบ.
Assembly Instructions (cont) Attaching the Utility Brushes, BBQ Grill Brush and Angled Nozzle The Utility Brushes, BBQ Grill Brush and Angled Nozzle all attach to the Steam Jet Nozzle. Use the following procedure for these attachments. (Refer to Figure 5). 1. Grasp the handle in such a way so you can not accidentally push the Steam Button. Caution: Do not try to add or remove attachments while steam is coming from the unit. 2. 3.
Assembly Instructions (cont.) Attaching the Squeegee and Large Utility Brush The Squeegee and Large Utility Brush both attach to the Large Steam Nozzle. Use the following procedure for these attachments. (Refer to Figure 6). 1. 2. Keeping the top of the Squeegee (or Large Utility Brush) at an angle, slide the Attachment Fittings (A) on the Large Steam Nozzle over the Attachment Hooks on the Squeegee (or Large Utility Brush) until the bottom of both pieces snap together.
Water Filling Instructions 1. 2. Place the unit on a level surface. Unplug the Power Cord. If the steam cleaner might still be hot from a previous use, complete steps 3-5 below. Otherwise proceed to step 6. 3. 4. Press the Steam Button continuously until all steam is removed from the unit. Continue to press the Steam Button while cautiously unscrewing the Safety Cap. Caution: Always press the Steam Button while unscrewing the Safety Cap.
Operating the Handheld Steam Cleaner 1. Plug the power cord into a convenient receptacle. The Steam Ready Light will immediately illuminate. (Note: The Steam Ready Light is illuminated when the Boiler is heating. The unit has no power switch.) Warning: This appliance has a grounded (3 prong) plug. Use only in properly installed 3 pronged outlets. Do not attempt to defeat this safety feature. 2. 3. The Steam Ready Light should extinguish in 3-4 minutes, indicating that the cleaner is ready to steam.
Specifications Input Voltage Input Frequency Output Power Water Capacity 120 60 900 6 VAC Hz W oz 180 ml Troubleshooting Guide PROBLEM Unit fails to heat Steam Cleaner heats up but there is no steam output. CAUSE SOLUTION Steamer not plugged in Plug into electrical outlet. Household Circuit Breaker Tripped or Fuse Blown Reset the circuit breaker or replace the fuse. If you need assistance contact a qualified electrician. Unit needs water. Steam outlet blocked.
Top Innovations, Inc. 400 NW Platte Valley Drive Riverside, Missouri 64150 www.topinnovations.
