MODEL MC1275 Heavy-Duty Steam Cleaner by Top Innovations, Inc. Please read all instructions before use. Mail in your warranty registration card.
LETTER FROM THE CEO Dear Valued Customer, Congratulations on purchasing your new MC1275 Heavy-Duty Steam Cleaner. This powerful product places the natural cleaning power of steam in a convenient appliance that is perfect for use anywhere around the home - inside or out. Plug your Heavy-Duty Steam Cleaner in, and in minutes you are ready to eliminate dirt, grease, grime, stains and more from most anywhere in or around your home.
IMPORTANT SAFEGUARDS WARNING: To reduce the risk of fire, electrical shock, or injury, the following basic safety precautions should always be followed when using an electrical appliance. READ ALL INSTRUCTIONS BEFORE USING YOUR HEAVY-DUTY STEAM CLEANER 1. DO NOT overfill unit with water. DO NOT fill Water Reservoir with more than 48 oz. (1,420 ml.) of water. Overfilling may result in burns from spilling water, or possible electrical shock. 2.
IMPORTANT SAFEGUARDS WARNING: To reduce the risk of electrical shock, this appliance has a three-pronged plug. This plug will fit in a polarized wall outlet only one way. If the plug does not fit fully in the outlet, contact a licensed electrician to install a proper outlet. DO NOT attempt to modify the plug or defeat this safety feature. 9. In order to unplug MC1275, grasp plug and pull smoothly and firmly from outlet. DO NOT attempt to unplug unit by pulling or tugging on cord. 10.
HEAVY-DUTY STEAM CLEANER PRODUCT INFORMATION The following features and accessories are included with your Heavy-Duty Steam Cleaner. Carefully inspect packaging material as some parts are shipped inside Styrofoam packaging. To obtain possible missing parts, refer to the Customer Support section on page 13 of this manual. UNIT FEATURES & ACCESSORIES 1. LIGHTED ON/OFF SWITCH 2. STEAM READY LIGHT 3. STORAGE COMPARTMENT 4. WATER RESERVOIR 5. HANDLE 6. STEAM LOCK SWITCH 7. STEAM BUTTON 8. CARRY HANDLE 9.
HEAVY-DUTY STEAM CLEANER PRODUCT INFORMATION • The Lighted On/Off Switch (1) provides a clear visual indication of whether the unit is powered on. • The Steam Ready Light (2) indicates when the unit is ready to begin steaming. • The Storage Compartment (3) is used for storing small accessories, and houses the Water Reservoir cap. • The Water Reservoir (4) is the tank in which water is stored for use by the unit. It is accessed by removing the Water Reservoir cap found inside the Storage Compartment.
ASSEMBLING THE HEAVY-DUTY STEAM CLEANER ATTACHING CARRY HANDLE 1. Insert Carry Handle into Carry Handle hole on top of unit. Please refer to illustration for assistance with proper alignment (FIGURE 1). 2. Use enclosed magnetic screw driver and screw to securely fasten Carry Handle to unit. ATTACHING MAIN ACCESSORIES FIGURE 1 WARNING: Do not try to connect accessories while unit is emitting steam. This section applies to the Steam Jet Nozzle, Squeegee, Floor Brush, Extension Wands and Triangle Brush.
ASSEMBLING THE HEAVY-DUTY STEAM CLEANER ATTACHING UTILITY BRUSHES WARNING: Do not try to connect accessories while unit is emitting steam. This section applies to all Utility Brushes. Note that Utility Brushes attach to Steam Jet Nozzle, not to main steam nozzle. 1. Align guide tab on inside of Utility Brush (FIGURE 3-A) with groove on bottom of Steam Jet Nozzle tip (FIGURE 3-B), and firmly press Utility Brush onto Steam Jet Nozzle. 2.
USING THE HEAVY-DUTY STEAM CLEANER FILLING WATER RESERVOIR WITH WATER 1. Place Heavy-Duty Steam Cleaner on a flat, level surface. 2. Make sure Lighted On/Off Switch is set to “Off” position and grounded power cord is unplugged from electrical outlet. 3. Flip up Storage Compartment lid. Cautiously unscrew and remove Water Reservoir cap. 4. Water Reservoir should always be emptied after each use. If it was not emptied after the last use, empty it now. This will prevent over-filling. 5.
USING THE HEAVY-DUTY STEAM CLEANER OPERATING HEAVY-DUTY STEAM CLEANER NOTE: Be sure that Water Reservoir has already been filled and that all desired accessories are connected before following these steps. 1. Plug grounded power cord into a convenient electrical outlet. CAUTION: This unit uses a grounded (3-prong) electrical plug. Use only in properly installed 3-prong electrical outlets. Do not attempt to alter plug or circumvent this safety feature in any way. 2.
CARE & STORAGE GUIDELINES PROPER STORAGE Preparing your Heavy-Duty Steam Cleaner for storage is quick and simple. When you have finished your steaming tasks, follow the steps listed below. 1. Switch Lighted On/Off Switch to “Off” position and unplug grounded power cord from electrical outlet. 2. Allow unit to completely cool (at least 30 minutes). 3. Press and hold Steam Button to release all remaining steam. 4. Remove all accessories from unit. 5.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Unit fails to steam. Lighted On/Off Switch does not illuminate. Unit is not plugged in. Plug into electrical outlet. Household Circuit Breaker / Ground Fault Interrupter has tripped or blown a fuse. Reset Circuit Breaker / Ground Fault Interrupter, or replace fuse. If you need assistance, contact a licensed electrician. Unit fails to steam. Lighted On/Off Switch does illuminate. Water Reservoir is empty.
TROUBLESHOOTING & CUSTOMER SUPPORT PROBLEM Water spills out from Water Reservoir fill hole when adding water. Accessories do not stay firmly attached to main steam nozzle. POSSIBLE CAUSE SOLUTION Water Reservoir is already full. Do not try to add any more water. Water Reservoir is too hot to be refilled. Allow more cooling time before refilling. Accessories are not being properly installed. Review steps for proper installation of accessories on pages 7 & 8 of this manual.
Top Innovations, Inc.
WARRANTY INFORMATION Before returning any product for any reason, you MUST call or e-mail Top Innovations Warranty Service at (800) 711-6617 or customerservice@topinnovations.com to obtain a Return Authorization Number. 30-DAY MONEY BACK POLICY If any item purchased directly from Top Innovations, Inc. does not meet your expectations, it may be returned within 30 days of the date of purchase for either a replacement or full refund of the purchase price less any shipping charges.
Top Innovations, Inc. 6655 Troost Ave. Kansas City, MO 64131 Tel: (800) 711-6617 (816) 584-9700 www.TopInnovations.com customerservice@topinnovations.
