Model MC1375 Modelo MC1375 Modéle MC1375 Canister Steam System Sistema A Vapor Con Depósito Nettoyeur-Chariot À Vapeur Owner’s Guide Guía del Usuario Mode D’emploi English p. 2 Español p. 22 Français p. 42 KEEP YOUR RECEIPT FOR WARRANTY PURPOSES Please read all instructions before use. GUARDE SU RECIBO A EFECTOS DE LAGARANTÍA Lea todas las instrucciones antes de usarlo. GARDEZ VOTRE REÇU AUX FINS DE LA GARANTIE Veuillez lire toutes les instructions avant l’utilisation.
IMPORTANT SAFETY INSTRUCTIONS ! WARNING: To reduce the risk of fire, electrical shock, or injury, the following basic safety precautions should always be followed when using an electrical appliance. READ ALL INSTRUCTIONS BEFORE USE 1. The Canister Steam System Boiler is designed to hold a maximum of 48 oz. (1,420 ml.) of water. Unplug electrical cord before filling with water. 2. DO NOT leave your Canister Steam System unattended when plugged in or not in use.
IMPORTANT SAFETY INSTRUCTIONS ! WARNING: To reduce the risk of electrical shock, this appliance has a threepronged plug. This plug will fit in a polarized wall outlet only one way. If the plug does not fit fully in the outlet, contact a licensed electrician to install a proper outlet. DO NOT attempt to modify the plug or defeat this safety feature. 11. The Canister Steam System is only meant to be used with recommended Canister Steam System accessories.
Product Information These features and accessories are included with your Canister Steam System. To obtain additional parts, refer to Product Support on Page 19 of this manual.
Product Information • The 10' Steam Hose (1) safely channels the flow of steam from the Boiler to the Steam Nozzle. • The Pressure Gauge (2) measures the pressure in the Boiler. • The Boiler Cap (3) is designed to safely contain steam inside the Boiler. The Boiler Cap must be unscrewed and removed in order to fill the Boiler with water. • The Steam Handle Cradle (4) functions as a convenient holder for the Steam Nozzle. • The Illuminated On/Off Switch (5) illuminates when the unit is powered On.
Product Information ACCESSORIES 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 2 11 2 - 16.5" Extension Wands Microfiber Mop Pad Scrubbing Mop Pad 5.5" Jet Nozzle Triangle Brush Large Brush 2 - 1.5" Nylon Utility Brushes 1.5" Brass Utility Brush Angled Nozzle 3" Scraper 13" x 8.5" Large Mop Head Bristle Brush Attachment Storage Bag Fill Cup Accessory Net 2.5" Round Brush 2 - 2.5" Round Scrub Pads Microfiber Mop Pad A1375-100 12 13" x 8.
Product Information • The 16.5" Extension Wands (1) connect to the Steam Nozzle. Used with mop attachment or for high or hard-to-reach places. • The Microfiber Mop Pad (2) attach to the Mop Head, and are designed for removing scuffs and stains from hard floors. The Pads are reusable and machine washable. • The Scrubbing Mop Pad (3) attach to the Mop Head, and are designed for removing scuffs and stains from hard floors. The Pads are reusable and machine washable. • The 5.
Assembling Your Canister Steam System STEAM MOPPING ACCESSORIES WARNING: Do not try to connect accessories while unit is emitting steam. EXTENSION WANDS 1. Select one of the Extension Wands. Insert end (A) of Wand onto Steam Nozzle (B) with yellow lock/release button slightly off center with hole. Fully insert and rotate wand slightly to allow button to snap into hole. 2. Using the same instruction, attach remaining Extension Wand to the first Wand.
Assembling Your Canister Steam System MICROFIBER PADS 1. Lay one Microfiber Pad on flat surface, with two fastener strips facing upward. 2. Align Mop Head with Microfiber Pad. Make sure Mop Head is oriented with Pad as shown, and centered as best as possible (See figure 2-A). 3. Press Mop Head firmly down onto Microfiber Pad. Fastener strips will adhere to Pad Grips on underside of Mop Head. Pad should now be attached and ready for use (See figure 2-B).
Assembling Your Canister Steam System STEAM CLEANING ACCESSORIES WARNING: Do not connect accessories while unit is emitting steam. JET NOZZLE / SCRAPER / TRIANGLE BRUSH 1. Select one of the three accessories (Jet Nozzle shown as example) and push onto the Steam Nozzle (A). 2. Rotate accessory until the yellow lock/release button snaps into the accessory hole (B). NOTE: The Jet Nozzle, Scraper and Triangle Brush can be connected to the end of an Extension Wand for reaching high or difficult spots.
Assembling Your Canister Steam System LARGE BRUSH NOTE: Large Brush connects to the Triangle Brush, not the Jet Nozzle. 1. Place Large Brush over the Triangle Brush, and firmly press it on to the Triangle Brush until it snaps into place. 2. To remove Large Brush, simply grip it firmly and pull it off of the Triangle Brush. ORDERING ACCESSORIES & PARTS Replacement accessories and parts for your Canister Steam System (model MC1375) may be ordered through our Website: www.mccullochsteam.
Accessory Recommendations Jet Nozzle / Angled Nozzle Triangle Brush Large Brush Scraper Round Scrub Pad Nylon Utility Brush and Round Brush Brass Utility Brush Mop Bristle Brush Attachment Dirt, Grease, Grime, Cracks and Crevices, Golf Clubs, Tread of Running Shoes Corners on Countertops, Bathtubs, Floors Floors, Grout Baked on Food, Grime, Grease, Stove Tops, Ovens Countertops, Bathtubs, Sinks, Refrigerators, Ovens, Slate Ovens, Stove Tops, Faucet Fixtures, Microwaves, Sports Equipment, Tile, Grout, Refr
Using Your Canister Steam System FILLING BOILER 1. Place Canister Steam System on a flat, level surface. 2. Make sure illuminated On/Off Switch is turned to “Off” and grounded power cord is unplugged from electrical outlet. ! If unit has been in use, always use the following safety precautions before removing the Boiler cap to add water: • Allow unit to cool for 20 minutes or until pressure gauge is at zero. • Press and hold Steam Trigger to release ALL remaining steam.
Using Your Canister Steam System GENERAL OPERATION NOTE: Be sure that Boiler has been filled and that all desired accessories are connected before following these steps. 1. For first time use, remove protective plastic cover from electrical plug. Plug power cord into a electrical outlet. 2. Switch Lighted On/Off Switch to “On” position. 3. The pressure gauge indicates the operating pressure of the steam cleaner. Once the needle is in the green section, the unit is ready to begin steaming.
Using Your Canister Steam System STEAM MOPPING NOTE: Be sure that Boiler has been filled and that all steam mopping accessories are connected before following these steps. It is recommended to sweep or vacuum hard floors before mopping. 1. Follow Steps 1-3 of General Operation section above. Refer to Page 9 for a listing of hard floor surfaces that are recommended for cleaning with the Canister Steam System. 2.
Storage & Care PROPER STORAGE Preparing your Canister Steam System for storage is quick and simple. When you have finished your steaming tasks, follow the steps listed below. 1. Turn unit “Off” and unplug power cord. 2. Allow unit to completely cool (at least 30 minutes). 3. Press and hold Steam Trigger to release all remaining steam. 4. Remove all accessories from unit. 5. Carefully remove Boiler Cap. 6.
Troubleshooting PROBLEM Unit fails to heat up. POSSIBLE CAUSE SOLUTION Unit is not plugged in. Household circuit breaker / ground fault interrupter has tripped or blown a fuse. Plug power cord into electrical outlet. Reset circuit breaker / ground fault interrupter, or replace fuse. If you need assistance, contact a licensed electrician. Immediately cease usage and unplug. Contact Consumer Service for further assistance (see Page 19 for details). Refer to Filling Boiler procedure on Page 13.
Replacement Parts & Accessories Refer to the part numbers below when ordering parts and accessories for your Canister Steam System. Replacement Accessories Part Numbers for Fast Reordering at www.mccullochsteam.
Product Support CONSUMER SERVICES For problems with your Canister Steam System, please refer to the Troubleshooting guide located on Page 17 of this manual. Additional inquiries should be directed to our consumer support services through our website, www.mccullochsteam.com. If you do not have internet access, you may also contact our Consumer Service Department by telephone, at 1-800-711-6617.
Warranty Information • Used consumable parts, accessories and attachments, including, but not limited to, brushes, hangers, scrub pads and mop pads. • Use of parts and accessories other than those produced or recommended by Steamfast. • Cosmetic damage, such as scratches, nicks and dents. • Damage caused by accident, water, flood, fire or other acts of nature or external causes.
review this product online evalúe este producto en línea évaluer ce produit en ligne www.mccullochsteam.com/reviews Manufactured by Vornado Air LLC under license from Husqvarna AB (publ). For more information on other McCulloch products, visit www.mcculloch.com For questions, or comments or warranty information, call 1-800-711-6617 or visit www.mccullochsteam.
